NEC NEAX 7400 IMX Command Manual page 251

3. Data Entry Instructions
Enter the tenant number of the necessary digits data to be applied.
DESTINATION CODE
TENANT
NUMBER
MAXIMUM 10 DIGITS
(TN)
TOLL CODE IDENTIFICATION may be
used for SMDR.
0=Local Code
1=Toll Code.
TN
DC
Enter the "access code + area/office code" (or its
element) to be specified the necessary digits.
Enter desired maximum necessary digits.
MAXIMUM
(DC) NECESSARY
DIGITS
(MND) 1-24
TOLL
MND
TOLL CODE ACCOUNT
IDENTIFICATION NUMBER
(TOLL)
0/1
AN
Account Code
Always enter "0" at RATE paramenter.
0=Out of Service
This parameter is used for Japan only.
1=Account Code
ND-70348 (E)
A/D
Enter the kind of the destination party
0=Analog
1=Digital
OPTION ANALOG LINE/
SERVICE DIGITAL LINE
(AN) DATA
0/1 (RATE)
RATE
AMND
(A/D)
0/1
CHAPTER 4
Page 246
Revision 3.0