Aabd: Assignment Of Speed Calling Restriction Data - NEC NEAX 7400 IMX Command Manual

AABD: Assignment of Speed Calling Restriction Data

1. General
This command is used to assign the Speed Calling system Restriction Data. This data is added to the Service
Feature Class of an individual station assigned to the Speed Calling system in order to restrict it from originating
calls.
2. Precautions
1. The Abbreviated Digit Codes (ADC) should already be assigned by the ASPD command.
2. The Speed Calling Override Service must be assigned by the ASYD command, SYS2, Index1, b6=1.
3. The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8.
3. Data Entry Instructions
ADC
The Abbreviated Digit Codes (ADC) corresponds
to the data assigned by the ASPD command.
SPEED
TENANT
CALLING
NUMBER
CODE (ADC)
(TN)
MAX. 4
DIGITS
0 1 2 3 4
RESTRICTION DATA (RES) is assigned the
squares where ADC and SFC cross. When
unassigned, RES or the corresponding item is
recognized as "0" (Restricted).
0 = Connection is restricted
1= Connection is allowed
ND-70348 (E)
SERVICE FEATURE CLASS (SFC)
5 6 7 8 9
RES
10 11 12 13 14
CHAPTER 4
Page 318
Revision 3.0
AABD
15