NEC NEAX 7400 IMX Command Manual page 426

FUNCTION
FA Forced Account/Forced Authorization Code
38 0= Check is not required
1= Check is required (For Remote Access to System)
BC C.O Line Idle Balance Condition.
39
0= Not balanced
TCM Travel Class Mark
40
0= Out of Service
TDMQ Tandem Off Hook OG Queuing
41
0= Out of Service
TRSC Trunk Restriction class
42
0= Out of Service
BT Inter-office Busy Service
43
0= Out of Service
PRV Line Trunk Privacy
0= Privacy Out of Service
44
1= Privacy In Service For Busy Verification, Call Waiting, Executive
Right of Way, Paging, Dictation, Data Communication, etc.).
A/D Analog/Digital Line Data
45 0= Analog
CW Call Waiting Service
46
0= Out of Service
TPQ Priority OG Queuing
47
0= Out of Service
BL Detection of Blocking Signal
48
0=No detection
TRKS Trunk Selection Sequence
49 0= Select from the trunk which becomes idle first.
1= Select from the trunk which becomes idle last.
DPLY Number Display of D
50
0= Not given
ACD 0= Out of service
51
1= Balanced
1= In Service
1= In Service
1-15= In Service
1= In Service
1= Digital
1= In Service
1= In Service
1= Detection
term
between offices
1= Given
1= –
ND-70348 (E)
LGRT
1-899
For Australia only
See AEFR command.
For CCIS voice route, assign
data "1".
Assign data "1" only for dig-
ital T1 routes or Bch of
ISDN routes.
Assign this data reversing to
the mate office data. (Espe-
cially, for CCIS)
For CCIS voice route and
ISDN Bch route.
0 0 0 0 Always assign data "0" even
ACD application.
ARTDN
REMARKS
CHAPTER 4
Page 419
Revision 3.0