Acid: Assignment Of Caller Id Data - NEC NEAX 7400 IMX Command Manual

ACID: Assignment of Caller ID Data

1. General
This command is used to assign calling number data for Calling Party Number - Name Assignment and Display
service.
2. Precautions
1. A maximum of 28 calling numbers can be assigned to a single station.
2. This command is available for the software Release 3 or later.
3. Data Entry Instructions
When TYPE=1 (Transfer, Incoming Permission denial) is assigned
Input Type
(TYPE)
1
TN Station Number
(STN)
MAXIMUM 6 DIGITS
Service Call Forwarding
Kind 1 Index (CFI)
(SRV1) 1-3
SRV1
1 = C.F. - All Calls
2 = C.F. - Busy Line
3 = C.F. - Don't Answer
4 = Incoming Permission
5 = Call Block
6 = Distinctive Ringing - Caller ID
Tenant Number for Station Number for
Call Forwarding Call Forwarding
(CFI-TN)
CFI-TN/CFI-STN
These parameters appear when CFI=2.
CFI
1 = Attendant Console
2 = Station
3 = Outside
ND-70348 (E)
Caller ID
(CID)
1-28
Abbreviated Digit
Code for C.F.
(CFI-STN) (ADC) 4 digits
This parameter appears when CFI=3.
ACID
Ringer
Pattern
(RGP)
0/1/5/6/7
RGP
This parameter appears
when SRV1 = 6.
ADC
CHAPTER 4
Page 473
Revision 3.0