Agip: Assignment Of Default Gateway Ip Address Data For Ldm; When “Kind=Fgh” Is Selected - NEC NEAX 7400 IMX Command Manual

AGIP: Assignment of Default Gateway IP Address Data for LDM

1. General
This command is used under FGH controlling to assign/delete the IP address allocated to FGH and IP address
of the Router dedicated to FGH.
2. Precautions
1. This command is available since Release 8 software enhancement.
2. Enter the LENS data of FGH/IPTRK card, and the existing data is displayed by clicking "Get" button if
already assigned. If no data has allocated to the input LENS, assign the data like IP address, Net Mask, etc.
3. It can't be executed to modify the existing data by this command. First delete the existing data, then reas-
sign the new data.
3. Data Entry Instructions
a.) When "KIND=FGH" is selected:
LENS
Enter the Line Equipment Number of the
FGH card. The existing data can be read
out by pressing the "Get" button.
LINE
EQUIPMENT
KIND OF
NUMBER
SELECTION
(LENS)
(KIND)
MG U G
FGH
KIND
Select "FGH".
CONTTYP
Select either, CLIENT
or SERVER
IP
ADDRESS
FGH IP
FOR
ADDRESS
DEFAULT
ADDRESS
(FGH_IP)
GATEWAY
(NETMSK)
(DG_IP)
DG_IP
Enter the IP address of the router.
ND-70348 (E)
NET
VOICE QSIG-PRIME
MASK CHANNEL
OF IP
CONTROL NUMBER
TYPE
(LINK_NUM)
(CONTTYP)
Select the maximum number of
client/server connections.
LINK_NUM
0 = -
1-32 = QSIG Prime Link
ARP
Select the Frame type of ARP, when
"Detail" check box is checked.
IEEE
DIX (standard setting)
FRAME
CLIENT/SERVER
LINK TYPE
CONNECTION
OF
MAX. NUMBER
ARP
(CSLINK_NUM)
0-32 (ARP)
CSLINK_NUM
4 line 8 line 16 line
24 line 32 line 48 line
64 line 96 line 128 line
192 line 255 line
CHAPTER 4
Revision 4.0
AGIP
Page 638