Asatn: Assignment Of Specific Attendant Number Data For Ndm - NEC NEAX 7400 IMX Command Manual

ASATN: Assignment of Specific Attendant Number Data for NDM
1. General
This command is used to assign a specific Attendant Number which allows a station user to access the desired
operator. The data assigned by this command is written in the Network Data Memory (NDM) of the Network
Control Node (NCN), updating the NDM at each Local Node (LN).
2. Precautions
1. The specific attendant number cannot be a station number or LDN already being utilized.
2. The maximum number of Attendant Consoles should be assigned by the ASYDN command, SYS 1, IN-
DEX 9.
3. The telephone number for specifying the attendant console must be assigned by the ALGNN command pri-
or to this command.
3. Data Entry Instructions
UGN
Fixed "1".
USER
GROUP
NUMBER
(UGN)
1
1
1
Enter the telephone number for special
attendant number assigned by the ALGNN
command.
FPC
Enter the FPC of the node accommodating the
specified attendant console.
ACCESS CODE (ACC)
MAXIMUM 16 DIGITS
ACC
ND-70348 (E)
Enter the ATN which corresponding
to the TK parameter for the attendant
console assigned by the ATRK
command.
FUSION TENANT
POINT CODE NUMBER
(FPC)
1-253
TN
Enter the tenant number which affects
the special attendant number.
ASATN
ATN
ATTENDANT
NUMBER
(TN) (ATN)
CHAPTER 4
Page 465
Revision 3.0