NEC NEAX 7400 IMX Command Manual page 667

RTP PKTLOSS JIT_MAX JIT_MIN MNGS JIT_COUNT
Check the "RTP" check box for detail assignment. (Usually default data "0" is set for all the parameters.)
PKGLOSS: Amount of Packet Loss [0%-100%]
Maximum Jitter Buffer [0-60 × 10ms]
JIT_MAX:
Minimum Jitter Buffer [0-60 × 10ms]
JIT_MIN:
MNGS: Interval of Jitter adjustment [0-255 times]
JIT_COUNT: Interval of Jitter statistics [0-255 second]
BASE_COUNT: Interval of Time-base correction [0-255 second]
JIT_FAST: Judging rate of fast arrived packet [0-100%]
TIME_FAST: Time-base correction Judgment [0-100%]
OPTION
Not used.
OPTIONAL DATA
(OPTION)
[32 byte]
BASE_COUNT
RTP
0=8% (default)
0=600ms (default)
0=80ms (default)
0=5 times (default)
0=1 second (default)
0=10 second (default)
0=100% (default)
0=50% (default)
ND-70348 (E)
JIT_FAST TIME_FAST
AGIP
IP ADDRESS
OF NTP
SERVER
(NTP_IP)
CHAPTER 4
Page 642-1
Revision 4.0