NEC NEAX 7400 IMX Command Manual page 783

3. Data Entry Instructions
1st DC
The first digit of service access code, etc.
(0-9,*,#)
TENANT
1st DIGIT CODE
NUMBER
(1st DC)
(TN)
CI
The status of the "1st DC" dialed
N=Normal(Idle)
H=Hooking
B=Busy
The primarily analyzed digits, prior to the ASPAL command.
Assign necessary (Minimum) number of digits for each Access
Code Basically.
To assign diferrent number of digits (such as "Timing Start" for
Telephone numbers), assign maximum number of digits in this
parameter.
CONNECTION STATUS INDEX
(CI)
N/H/B
Whether the station busy status is monitored by the system or not.
For Hotel system, assign "0" for this parameter.
0=Out of Service
ND-70348 (E)
NND
NUMBER OF NECESSARY DIGITS
(NND)
MAXIMUM 6 DIGITS
BLF
AGNPL
BUSY LAMP FIELD
(BLF)
0/1
1=In service
CHAPTER 4
Page 744
Revision 3.0