Ashpn: Assignment Of Station Hunting Group-Pilot For Ndm - NEC NEAX 7400 IMX Command Manual

ASHPN: Assignment of Station Hunting Group-Pilot for NDM

1. General
This command is used to assign the data related to the Station Hunting - Pilot for Netfusing Service. The data
assigned by this command is written in Network Data Memory (NDM) of the Network Control Node (NCN),
updating NDM at each Local Node (LN).
2. Precautions
1. This command is also used to modify and delete the Station Hunting - Pilot service feature related data.
2. The maximum number of member stations within a Hunting Group is 100, not including the Secretary Sta-
tion. It cannot be executed to assign a station belongs to other Station Hunting Group in duplicate.
3. The Pilot station number is assigned in the TELN parameter.
3. Data Entry Instructions
UGN
Fixed to 1
USER GROUP
NUMBER (TELN)
NUMBER (UGN)
NUMBER TELN
OF
STATIONS
(CNT)
2
3
4
5
Enter the Telephone Number to be assigned in "EDIT TELN" box on the display.
Note:
TELEPHONE SECRETARY TELEPHONE
NUMBER (SECRETARY TELN)
Max. 16 digits
STATION NUMBER (STN)
NUMBER
OF
STATIONS
(CNT)
27
28
29
30
SECRETARY TELN
Enter the secretary station number if required.
Max. 16 digits
TELN NUMBER
OF
STATIONS
(CNT)
52
53
54
55
ND-70348 (E)
TELN NUMBER
OF
STATIONS
(CNT)
77
78
79
80
ASHPN
TELN
CHAPTER 4
Page 514
Revision 3.0