Ansdn: Assignment Of Number Sharing Data For Ndm - NEC NEAX 7400 IMX Command Manual

ANSDN: Assignment of Number Sharing Data for NDM

1. General
This command is used to assign and delete Main Station and Sub Station data for Number Sharing service or
Dual Station Call service.
2. Precautions
1. This command is available for Release 3 or later software.
2. This command is used for the Network Control Node.
3. For detailed information on Number Sharing service, see "Built-in PHS System Manual".
3. Data Entry Instructions
MAIN USER MAIN TELEPHONE NUMBER
GROUP
NUMBER
(M-UGN)
LM
0 = Number Sharing
1 = Dual Station Call
SERVICE
SPECIFICATION
(LM)
0/1
0 = Only Main Telephone Number is used for SMDR and MCI Mail Box Numbers
1 = Both Main Telephone Number and Sub Telephone Number are used for SMDR
and MCI and VPS Mail Box Numbers
Note :
(M-TELN)
MAX. 16 digits
OUTPUT EXTERNAL
EQUIPMENT
(OD)
0/1
When this parameter is set to 0 , the mail box for Sub Station must be deleted.
SUB USER
GROUP
NUMBER
(S-UGN)
0 = Message Waiting Control for Main and Sub Telephone Numbers
1 = Message Waiting Control for Main Telephone Number only
MESSAGE WAITING
CONTROL
(MW)
0/1
OD
ND-70348 (E)
SUB USER GROUP NUMBER
(S-TELN)
MAX. 16 digits
MW
TELEPHONE EQUIPMENT NUMBER
(INDEX)
1-65535
ANSDN
CHAPTER 4
Page 691
Revision 3.0