Akyd: Assignment Of Key Data For Dterm - NEC NEAX 7400 IMX Command Manual

AKYD: Assignment of Key Data for D
1. General
This command is used to assign the following key data corresponding to each line/feature button on a D
• Line Key Data
• Function Key Data
• Intercom Key Data
• DSS Key Data
2. Precautions
term
1. The D 65 (16-button type) and D
page]). If the default data is to be used, assignment in AKYD is not necessary. The table below shows the
specification pertaining to data assignment for the D
term
D 65
term
D 75
2. Before assigning the key data for a D
using the ASDT command (TN, STN, TEC = 12 (D
mand is referred to as "MY LINE".
Note 1:
This "MY LINE" corresponds to the physical port associated with the LENS of a ELC card.
3. By assigning another station line to a feature button using this command, an incoming call terminated to a
station line other than My Line can be answered or can be transferred to elsewhere as in the case of the My
Line. A station line other than My Line is referred to as a "Sub Line". A "Sub Line" can be assigned not
term
only to a D
must be assigned by the ASDT command before the key data is assigned. When the Sub Line and the My
Line belong to different tenants, use the ATNR command and clear the "Tenant to Tenant Restriction".
4. A Multi-Line key (the key for My Line and Sub Line) on the D
Prime Line is not assigned, the My Line serves as the Prime Line. When the user goes off-hook, the Prime
Line is automatically selected on the D
5. A virtual line can be assigned as a Sub Line of the D
My Line for outgoing calls and other service operations.
Note 2:
Virtual Line --- A virtual LENS exists only in memory, but does not exist physically. Data can be assigned but no
hardware is required: Example: LENS = 000311. The virtual LENS is assigned by the ASDT command in the
same way as an ordinary line. (The telephone class is TEC = 18: Virtual Line)
term
Table 4-10 Data Assignment for the D
term
TYPE OF D
8-button type
16-button type
24-button type
8-button type
16-button type
32-button type
term
Note 1
but to any conventional telephone. In addition, the station data for My Line and Sub Line
term
term
75 have the default key data. (Refer to [Precautions (6) on the next
term
.
LINE/FEATURE BUTTON
KYN = 1-8
KYN = 1-16
KYN = 1-24
KYN = 1-8
KYN = 1-16
See Figure 4-9
using this command, be sure to assign the station data of the D
term
)). The station number assigned by the ASDT com-
.
term
. The virtual line can be used the same way as the
Note 2
ND-70348 (E)
term
NUMBER OF BUTTONS
8
16
24
8
16
32
term
can be assigned as Prime Line. If the
AKYD
term
.
term
CHAPTER 4
Page 337
Revision 3.0