Gpio Functions - Studer OnAir 3000 Operating Instructions Manual

OnAir 3000 Digital Mixing Console
Error Code Error Type Error Text / Comment
Info
3023
Info
3024
Warning
3025
Info
3026
Info
3027
Error
3029
Warning
3030
Info
3031
Warning
3033
Warning
3034
Warning
3035
Warning
3036
5.12.4.4

GPiO functions

5-146 Operation
I/O 21, Additional HD Link to a DSP card required. Rack ‚Int' provides 128 outputs, but only 96 channels
are connected to the CORE. 32 outputs not available.
Appears during power-up if not enough HD link channels to the DSP cards are available. E.g. there are 3
MADI cards (3*64 channel), but only one HD link (with 96 channel).
I/O 21, MADI card in slot 3 of the rack ‚Int' switched to redundant interface. AUX interface is active.
Appears during runtime but NOT during power-up if the MADI card has switched between the AUX- and the
MAIN interface.
I/O 21, MADI card in slot 3 of the rack ‚Int': Neither MAIN nor AUX interface is active.
Appears during runtime but NOT during power-up if neither MAIN nor AUX interface of the MADI card could
lock.
I/O 21, Not enough MADI channels from StageBox ‚StageBox1' to Rack ‚Int'. Provides 80 inputs, but only
64 channels are available. 16 inputs not available.
Appears during power-up if not enough MADI channels to the master D21m cards are available. E.g. there
are 5 AES cards (5*16 channel), but only one MADI link (with 64 channel).
I/O 21, Not enough MADI channels from StageBox ‚StageBox1' to Rack ‚ Int ‚. Provides 80 outputs, but
only 64 channels are available. 16 outputs not available.
Appears during power-up if not enough MADI channels to the master D21m cards are available. E.g. there
are 5 AES cards (5*16 channel), but only one MADI link (with 64 channel).
I/O 21, Product Verification Failed. The Product does not match the hardware platform.
Appears during power up if the D21m rack detects a hardware platform by reading the HD Module Type
that does not match the specified product in product.ini.
I/O 21, HD-Card unlock. Missing HD-Link input signal. (Rack 'External 2')
Appears during power-up or runtime if the HD card cannot lock. (No HD signal/clock provided on HD IN 1;
HD IN 2 is not relevant ort he audio clock).
I/O 21, HD Card lock. HD-Link input signal available. (Rack 'External 2')
Appears only during runtime if the HD card is locked again after the HD Link input signal was missing. (see
also User Warning 3030).
I/O 21, Configuration mismatch: Card from Slot 2 of the rack 'Internal' and the D21m.xml configuration does
not match. XML configuration ignored!
Appears for each slot that does not match to the XML configuration during power-up.
I/O 21, Configuration mismatch: Card from Slot 2 of the rack 'StageBox1' and the D21m.xml configuration
does not match.
Hardware configuration ignored!
Appears for each slot that does not match to the XML configuration during power-up of the stage box.
I/O 21, Missing GPIO Card(s). 32 GPInputs configured, 16 GPInputs found.
Appears during power-up, if the actual number of installed GPIO cards doesn't match the number of GPIn-
puts specified in the D21m.xml file.
I/O 21, Missing GPIO Card(s). 32 GPOutputs configured, 16 GPOutputs found.
Appears during power-up, if the actual number of installed GPIO cards doesn't match the number of
GPOutputs specified in the D21m.xml file.
SW V6.0 Document generated: 10.10.14