Rotary Assign 2 - Group 2 (Onair 3000 Only) - Studer OnAir 3000 Operating Instructions Manual

OnAir Digital Mixing Consoles
OnAir 1500
6.5.37.2

Rotary Assign 2 - group 2 (OnAir 3000 only)

1 2
AUX1
3 4
5 6
AUX2
7 8
9 10
AUX3
11 12
13 14
AUX4
15 16
6-122 Configuration
The four INPUT, GAIN/CAL, 1 and 2 keys are used for assigning input rout-
ing, gain/cal and AUX bus 1/2 functions to the fader strip rotary knobs and
the keys, as well as to the OLED displays directly above them. These
four assign functions are considered to be fixed (as also the fixed key labels
imply). Further functions without dedicated keys – such as pan(orama) or
bal(ance) – are selected with the 34 rotary knob in the FUNCTION field.
All of these assignment functions can be configured in the Fader Assign page.
However it is not recommended to modify the INPUT, GAIN/CAL, 1 and 2
keys.
This page is used to assign functions to the 16 rotary assign keys of the OnAir
3000's optional rotary assign module(s), see left. Additional tree items may
appear if more modules are used, or in case of split desk or A/B desk con-
figurations.
These keys allow selecting the functions of the rotary encoders of the optional
rotary modules (usually installed above the fader modules).
SW V6.0 Document generated: 10.10.14