Output Routing Keys; Xl Section - Studer OnAir 3000 Operating Instructions Manual

Hide thumbs Also See for OnAir 3000:

Table of Contents

output Routing Keys

Document generated: 10.10.14

This page allows assigning up to 24 Partial Output Routings to the output

routing keys. Which hardware keys this will be on the desk must be defined

in the Desk_KeyMapping.xml file.

The AUX bus required to listen to outside sources as well as the talkback

source location are defined on this page. Per default, AUX 1 is assigned to

the XL box in the control room, AUX 2 to the XL box in studio 1, AUX 3

to the one in studio 2, and AUX 4 to the one in studio 3. Source selection is

performed in the user GUI's Route – XL Assign page.

OnAir Digital Mixing Consoles

Configuration  6-109

Table of Contents