Huawei Quidway S3900 series Command Manual page 63

Command Manual – Configuration File Management
Quidway S3900 Series Ethernet Switches-Release 1510
Note:
If you execute the save command with the cfgfile argument not specified, the
current configuration is saved in the configuration file with which the device latest
starts. If the device starts using the default configuration, the current configuration is
saved in the default configuration file.
To make a switch to adopt the current configuration when it starts the next time,
save the current configuration using the save command before restarting the
switch.
Example
# Save the current configuration to the primary configuration file.
<Quidway> save main
The configuration will be written to the device.
Are you sure?[Y/N]y
Please input the file name(*.cfg)(To leave the existing filename
unchanged press the enter key):123.cfg
Now saving current configuration to the device.
Saving configuration. Please wait...
............
Unit1 save configuration flash:/123.cfg successfully
Unit2 save configuration flash:/123.cfg successfully
%Apr 2 02:58:01:682 2000 Quidway CFM/3/CFM_LOG:- 1 -Unit1 save configuration
successfully.
%Apr 2 02:58:01:783 2000 Quidway CFM/3/CFM_LOG:- 1 -Unit2 save configuration
successfully.
# Save the current configuration to 234.cfg in unit 1.
<Quidway> save unit1>flash:/234.cfg
The current configuration will be saved to unit1>flash:/234.cfg [Y/N]:y
Now saving current configuration to the device.
Saving configuration. Please wait...
...........
Unit1 save configuration unit1>flash:/234.cfg successfully
<Quidway>
%Apr 2 04:07:21:805 2000 5500-EI CFM/3/CFM_LOG:- 1 -Unit1 save configuration
successfully.
Huawei Technologies Proprietary
1-14
Chapter 1 Configuration File Management
Commands