Peer-Domain-Link Port-Channel Exclude-Vlan - Dell S6100 Configuration Manual

mac-address
vlan-range
Command Modes VLT DOMAIN PROXY GW STATIC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.4(0.0)
Usage Information You can configure the MAC address of a VLT peer in a remote VLT domain to associate with the static VLT proxy
gateway and exclude a VLAN, or a range of VLANs, from proxy routing.
Example
Dell(conf)# vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
Dell(conf-vlt-domain-proxy-gw-static)# remote-mac-address 00:01:e8:06:95:ac
exclude-vlan 3
Dell(conf-vlt-domain-proxy-gw-static)#

peer-domain-link port-channel exclude-vlan

Configure the VLT port channel, which is connected to the remote VLT domain, for the proxy gateway or configure the VLANs you want to
exclude from VLT proxy gateway.
Syntax [no] peer-domain-link port-channel interface-identifier exclude-vlan vlan-range
Parameters
port-channel
interface-identifier
1664 VLT Proxy Gateway
Enter the 48-bit hexadecimal address in nn:nn:nn:nn:nn:nn format.
Enter the VLAN IDs in which proxy gateway is not needed. The VLANs are excluded from
doing proxy gateway. The value can be a single VLAN ID, comma-separated VLAN IDs, a
range of VLAN IDs, or a combination. For example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the S4810, S4820T, S6000, and Z9000.
Configure the proxy-gateway interface port-channel.
Enter the interface type.