Add Co, Fx, Wats, And Pcol; Add Did Trunks - Avaya CMC1 Installation, Upgrades And Additions

Add CO, FX, WATS, and PCOL

8. If after trying all these settings, the echo still exists, contact technical
support. Refer to
Add CO, FX, WATS, and PCOL
Requirements
Each Central Office (CO), Foreign Exchange (FX), Personal Central Office Line
(PCOL), or Wide Area Telecommunications Service (WATS) trunk connects to 1
port of either an 8-port TN747B or to 1 of several CO trunk circuit packs.
Installation
1. Install a TN747B or a CO Trunk circuit pack in the assigned carrier slot (if
an additional circuit pack is required).
2. Administer the forms listed under CO, FX, WATS, or PCOL Trunk Group in
Administrator's Guide for Avaya MultiVantage Software.
3. Determine the port assignment of the trunk from the Trunk Group form.
EXAMPLE:

Add DID Trunks

Requirements
Two circuit packs presently support Direct Inward Dial (DID) trunks: the TN753
DID trunk circuit pack and the TN797 Combination Circuit pack. Each can support
up to 8 DID trunks.
555-233-118
''Where to get additional help'' on page
3
Cabinet (Port Carrier
Network)
A 07
Slot
Number
Issue 5 October 2002
-xii.
01
Port
Number
5-27