Table of Contents
Advertisement
7 Data Services - PPPoA to PPTP Relaying
7.2
Configuring and Using a PPTP Connection
Introduction
In this section
92 / 362
Before you can open a PPTP tunnel towards the STWireless, firstly
you must initially configure a PPTP dial up connection on your PC.
Once this PPTP dial up connection is configured, you can use it to
open a PPPoA/PPTP connection to the remote side of the ADSL
line.
Because the configuration and use of such a connection follows
similar patterns for all popular OSs, this section will describe the
procedures in global.
In section 7.3 an example is provided how to create and use a
PPTP Dial Up icon in MS Windows 98.
Refer to appendix C for more information on other OSs.
Topic
Preparing your PC for PPPoA/PPTP
Using PPTP towards your STWireless
See
7.2.1
7.2.2
3EC 17766 AAAA TCZZA Ed. 01
Advertisement
Table of Contents
