Deleting A Multicast Vlan - Alcatel Omni Switch/Router User Manual

Changing the Admin Status for a VLAN Policy
1. At the prompt enter a
2. The following menu displays:
The rule number is listed with other information on the multicast
entered the
change and enter it at this prompt and press
3. The following menu displays:
Type an to enable this rule or a
will start using the rule criteria to segment data traffic.
The system returns to the
multicast , or quit modifying the multicast
VLAN

Deleting a Multicast VLAN

You can delete a multicast
longer flooded to the recipients you defined. Follow these steps to delete a multicast
1. Type followed by the Group number, a colon (:), and the multicast
that you want to delete. For example to delete multicast
type:
2. The following prompt displays:
Enter a and press
display confirming the deletion.
and press
command. Find the number corresponding to the rule you want to
to disable it. If the rule is enabled, the multicast
menu. You can modify more attributes for this
. When you delete a multicast
VLAN
to complete the deletion of the multicast
Modifying Multicast VLANs
.
just after you
VLAN
.
by typing a .
VLAN
, multicast traffic is no
VLAN
2 in Group 3, you would
VLAN
VLAN
VLAN
.
VLAN
number
VLAN
. A message
Page 23-11