The Ast710 Dhcp Server - Alcatel SPEED TOUCH 710 User Manual

13.4.2

The AST710 DHCP Server

In this subsection
'DHCP Server Start up
Mode' radiobuttons
Configuring the AST710
for a LAN without
DHCP
3EC 17605 AAAA TCZZA Ed. 02
The 'DHCP Server Start up Mode' Radiobuttons
"
Configuring the AST710 for LANs without DHCP Server
"
Configuring the AST710 as DHCP Server
"
Configuring the AST710 for Auto DHCP
"
'DHCP Server Configuration' Table
"
Address Pool Configuration
"
PPP Spoofing Configuration
"
'DHCP Server Lease' Table
"
Adding Leases Manually.
"
On the AST710 'DHCP' page the 'DHCP Server Start up Mode'
radiobuttons allow to configure the AST710 DHCP server mode:
To setup the AST710 without DHCP , tick
In this configuration, it is assumed that all members, the AST710
included, have static IP addresses.
See subsection 13.3.2 for static IP addressing of the AST710.
Note: This configuration might be required in case you use the Transparent
Bridging packet service.
13 Networking - IP
.
153 / 254