Table of Contents
Advertisement
9
Position the populated rack tray in the equipment rack.
10 Secure the rack tray to the equipment rack with either set of the four provided screws. (Select the screw set that is
compatible with the equipment rack hole threads.)
11 Complete the cable dressing. Coil the excess power cord and secure it on the tray behind the router using the
provided Velcro tie wraps.
12 Plug the AC power cord into a standard 110/220 VAC outlet.
Network Connections
The following sections describe how to connect various network cables to the router.
Connecting the Ethernet Cable
Figure 16 Connecting the Ethernet Cable
Ethernet LAN Port
Follow this procedure to connect the OmniAccess 601, OmniAccess 602, and OmniAccess 604 to an Ethernet LAN
network. Refer to Figure 16.
1
Connect the RJ-45 connector of a category 5 rated Ethernet cable to either the Ethernet 0 or Ethernet 1 port.
2
Connect the other end of the Ethernet cable to the LAN port.
Make sure that the cable connectors are locked and secure in the ports.
For cable pinout information, refer to Appendix A in the OmniAccess 601, OmniAccess 602, and OmniAccess 604
Installation Guide.
18
Fast Ethernet Port 0
Quick Start Guide: OmniAcces 600-Series Routers
Fast Ethernet Port 1
Alcatel
Advertisement
Table of Contents
