Deleting A Line Of Text From The Text Buffer; Inserting A Line Of Text Into The Text Buffer; Editing A Line Name Of Text In The Text Buffer - Alcatel Omni Switch/Router User Manual

Deleting a Line of Text from the Text Buffer

You can use the command to delete a specific line in the text buffer. To use this
command, enter , followed by line number of the line of text you want delete, which is
shown by the command. For example, to delete the third line of text in the text buffer,
enter
at the system prompt.
Enter the command again to view the contents of the buffer. Note that the text that
appeared at line 3 has been deleted.

Inserting a Line of Text into the Text Buffer

You can use the command to insert a line of text between two existing lines in the buffer.
To use this command, enter
text to appear. For example, if you want to add the text,
and in the buffer, enter
at the system prompt. The following screen will be displayed:
Enter the line of text,
At the system prompt, enter the
nal text buffer looked like this,
the revised text buffer, with the inserted text, will now appear as follows:

Editing a Line Name of Text in the Text Buffer

You can use the command to edit an existing line of text in the buffer. To use this
command, enter , followed by the line number of the text you want to edit. For example, if
you want to edit the text at line 01, enter
at the system prompt. The following screen will be displayed:
Enter the text as you want it to appear and press
Enter the command again to list the contents of the text buffer. Note that the buffer now
reflects the edited line of text.
, followed by the number of the line where you want the new
.
command to view the contents of the buffer. If the origi-
, between lines
.
Editing Text Files
Page 7-9