Advertisement
Related
configuration mode exclusive
Commands
configuration mode exclusive
c e
Enable exclusive configuration mode.
Syntax
configuration mode exclusive {auto | manual}
To negate the configuration, use the no configuration mode exclusive {auto | manual}
command.
Parameters
auto
manual
Defaults
CONFIGURATION mode does not lock by default.
Command Modes
EXEC Privilege
Command
Version 7.6.1.0
History
Usage
If you choose the manual option, you must enter set the lock each time before entering
Information
CONFIGURATION mode.
If you choose the auto option, you can exit to EXEC Privilege mode and re-enter CONFIGURATION
mode without setting the lock again.
If another user attempts to enter the CONFIGURATION mode while a lock is in place, the following
message is generated:
% Error: User "" on line console0 is in exclusive configuration mode
If a user is already in CONFIGURATION mode when a lock is executed, the following message is
generated:
% Error: Can't lock configuration mode exclusively since the following users
are currently configuring the system:
User "admin" on line vty1 ( 10.1.1.1 )
Enable exclusive configuration.
Enter
Enter
Introduced on C-Series and E-Series
Note:
The CONFIGURATION mode lock corresponds to a VTY session, not to a user. If you
set a lock and then exit the CONFIGURATION mode and another user enters
CONFIGURATION mode, you will be denied access when you attempt to re-enter
CONFIGURATION mode.
auto
to set the exclusive mode to auto.
manual
to set the exclusive mode to manual (the default).
Configuration Rollback | 451
Advertisement
