Download Print this page

GRAPHTEC CE6000 SERIES User Manual: When User Or Standard Modes Are Selected

Graphtec ce6000 series cutting plotter.
Hide thumbs

Advertisement

4
Press the [2] key (DISTANCE ADJUST).
DISTANCE ADJUST setting screen is displayed.
5
Press the [1] key (MODE).
DISTANCE ADJUST MODE selection screen is displayed.
6
Press the [1] key (USER), the [2] key (CUSTOM), or the [3]
key (STANDARD).
Mode is selected and it will return to DISTANCE ADJUST screen.
7
The procedures are different depending on the selected
mode.

When USER or STANDARD modes are selected

Jump to step 9.
When CUSTOM mode is selected
Press the [2] key (CUSTOM UNIT).
CUSTOM UNIT selection screen is displayed.
8
Press the [1] key (5mm), the [2] key (10mm), or the[3] key
(50mm).
CUSTOM UNIT is selected and it will return to DISTANCE ADJUST
screen.
9
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS SETTING screen (2/4).
10
Press the [PAUSE/MENU] key.
It will return to default screen.
Supplement
It will return to ARMS setting screen (2/4)
without changing the settings when you press
the POSITION ( ) key (CANCEL).
Supplement
It will return to MARK DISTANCE screen
without changing the settings when you press
the POSITION ( ) key (PREVIOUS).
Supplement
It will return to MARK DISTANCE screen
without changing the settings when you press
the POSITION ( ) key (PREVIOUS).
5-17

Advertisement

   Also See for GRAPHTEC CE6000 SERIES

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jishad Jan 10, 2018 08:16:
    my graphtec ce 6000-60 showing an error message
    Hardware illegal code. Can you solve this
  • sina oyekunle Dec 21, 2017 02:44:
    my graphtec ce 6000-60 showing an error message: check cam_b-pcb
  • jitendra solanki Jun 14, 2017 05:31:
    i want ce6000 series user manual pdf file