Axis Adjustment (2Point Detection) - GRAPHTEC CE6000 SERIES User Manual

3POINTS
MARK TYPE 1
4POINTS
MARK TYPE 1
With more registration marks, precision of matching the printed image and the cutting will increase. But if there
are many registration marks, it will take longer to detect, and the area that can be cut becomes smaller.

1 axis adjustment (2POINT detection)

It will detect the tilt of the printing from 2 registration marks, and cut
is performed matching the tilt of the print.
MARK TYPE 1
MARK TYPE 2
MARK TYPE 2
MARK TYPE 2
Printable range
Supplement
Multiple registration marks (Alignment
registration mark) is not available. (See
the "Multiple registration marks [Alignment
registration mark]
The printable range on the chart to the left
is for when the registration mark detection
movement distance is not specified. The
cutting area changes depending on the
registration mark detection movement
distance that is set.
5-8
".)
P.5-9