Download Print this page

GRAPHTEC CE6000 SERIES User Manual: Related To Hp-gl Command

Graphtec ce6000 series cutting plotter.
Hide thumbs

Advertisement

Related to HP-GL Command

A useful chapter when using the HP-GL command.
Model ID Response (HP-GL MODEL EMULATED)
This function set the operation upon receipt of the "OI" command requesting for the model ID. The reply will be
7550 when set to 7550, and 7586 when set to 7586.
Operation
1
Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
2
Press the POSITION ( ) key (I/F).
INTERFACE setting screen (1/2) is displayed.
3
Press the [3] key (HP-GL MODEL EMULATED).
HP-GL MODEL EMULATED setting screen is displayed.
4
Press the [1] key (7550) or the [2] key (7586).
5
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to INTERFACE setting screen (1/2).
6
Press the [PAUSE/MENU] key.
It will return to the default screen.
Supplement
Perform the settings in Normal mode.
11-7

Advertisement

Troubleshooting

   Also See for GRAPHTEC CE6000 SERIES

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jishad Jan 10, 2018 08:16:
    my graphtec ce 6000-60 showing an error message
    Hardware illegal code. Can you solve this
  • sina oyekunle Dec 21, 2017 02:44:
    my graphtec ce 6000-60 showing an error message: check cam_b-pcb
  • jitendra solanki Jun 14, 2017 05:31:
    i want ce6000 series user manual pdf file