Thank you for choosing a Graphtec CE6000 Series plotter. The CE6000 Series plotters employ a digital
servo drive system to achieve high-speed and high-precision cutting. In addition to cutting marking ﬁlm and
other media, an CE6000 series plotter can also be used as a pen plotter. To ensure high cutting quality and
optimal productivity, be sure to read this User's Manual thoroughly prior to use.
This product is manufactured and sold pursuant to a license under Gerber Scientific International, Inc.'s U.S.
Patent No. 5,537,135 and its foreign counterparts.
Notes on this Manual
(1) No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or
by any means, without the prior written permission of Graphtec Corporation.
(2) The product speciﬁcations and other information in this manual are subject to change without notice.
(3) While every effort has been made to provide complete and accurate information, please contact your
sales representative or nearest Graphtec vendor if you ﬁnd any unclear or erroneous information or wish
to make other comments or suggestions.
(4) Not with standing the stipulations in the preceding paragraph, Graphtec Corporation assumes no liability
for damages resulting from either the use of the information contained herein or the use of the product.
All names of companies, brands, logotypes, and products appearing in this manual are the trademarks or
registered trademarks of their respective companies.
This User's Manual is copyrighted by Graphtec Corporation.