Mounting the Roll-medium tray
Mounting (CE6000-40 and the CE6000-60 without stand)
1
Set the roll media tray in using the roll media tray guide rail.
Make sure the rollers on the roll media tray are on the outside
on both sides.
Roll-medium tray
guide rail
Roll-medium trays
Mounting the Stock shafts
Mounting (CE6000-60)
1
Set one stopper in the stock shaft. (Keep the stopper screws
slightly loose.)
2
Put the side with the gear on the left side of the machine
(looking from the back) and then slide the stock shaft into the
media stocker.
Slide the media stocker in so that it is bookended by the gear
and the fixed stopper. Make sure the stock shaft touches the
roller.
Gear
Roller
Roller
Stock shafts
Stoppers
Fixed stopper
1-14