Setting Origin Point When Hp-Gl Is Set - GRAPHTEC CE6000 SERIES User Manual

Setting Origin Point When HP-GL is Set

When using the HP-GL command, the origin point is set to either the lower left of the cutting area or the center.
Supplement
When using the GP-GL command, this setting does not affect the operation.
See "Settings of Controls from Computer"
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
MENU screen
(Normal mode)
2
Press the POSITION ( ) key (I/F) in Normal mode, or press
the [2] key (I/F) in Simple mode
INTERFACE screen is displayed.
INTERFACE screen
(Normal mode)
3
Press the [2] key (HP-GL ORIGIN POINT) in Normal mode,
or press the [1] key (HP-GL ORIGIN POINT) in Simple mode.
HP-GL ORIGIN POINT setting screen is displayed.
4
Press the [1] key (LOWER LEFT) or the [2] key (CENTER).
5
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to I/F screen.
6
Press the [PAUSE/MENU] key.
It will return to the default screen.
about setting the COMMAND.
P.11-1
MENU screen
(Simple mode)
INTERFACE screen
(Simple mode)
3-9
Supplement
It will return to I/F screen without changing the
settings when you press the POSITION [ ] key
(CANCEL).