Download Print this page

GRAPHTEC CE6000 SERIES User Manual Page 41

Graphtec ce6000 series cutting plotter.
Hide thumbs

Advertisement

5
Position the media and the push rollers to correspond with
the width of the media.
When the CE6000-60
The push rollers push down on either side of the media. Use
the grit roller position guide to make sure the push rollers are
set on top of the grit rollers.
Push roller
Media
When the CE6000-120
Use the 3 push rollers to push down the sides and center of
the media. Use the grit roller position guide and make sure
the push rollers are on top of the grit rollers.
You can adjust the center push roller's hold-down force.
Push roller
Grit roller
(The push roller is on top of the grit roller.)
(The center push roller is not on top of the grit roller.)
Grit roller
Grit roller position guide
Push roller
Media sensor
Grit roller position guide
Push roller
Push roller
Media sensor
Supplement
Supplement
(The push roller is on top of the grit roller.)
(The center push roller is near the edge.)
2-11
The media must always be positioned over
the media sensor.
See "2.4 Aligning the Push Rollers"
about the position of the push rollers.
The media must always be positioned over
the media sensor.
See "2.4 Aligning the Push Rollers"
about the position of the push rollers.
See "2.4 Aligning the Push Rollers"
for information about push roller hold-down
force.
P.2-19
P.2-19
P.2-19

Advertisement

   Also See for GRAPHTEC CE6000 SERIES

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jishad Jan 10, 2018 08:16:
    my graphtec ce 6000-60 showing an error message
    Hardware illegal code. Can you solve this
  • sina oyekunle Dec 21, 2017 02:44:
    my graphtec ce 6000-60 showing an error message: check cam_b-pcb
  • jitendra solanki Jun 14, 2017 05:31:
    i want ce6000 series user manual pdf file