7
Press the [1] key (DONE).
Messages for testing are displayed on the screen.
8
Operate switches and sensors following the instructions on
the screen.
"NORMAL" will be displayed if the operation is detected correctly, and
next test will start.
It will return to TEST menu screen once all the test items are completed.
Test items are as following.
1
Set lever sensor
5
+X media sensor
9
[1] key
13
POSITION [ ] key
17
[ENTER] key
21
[SIMPLE] key
Reading the Error Message
Contents of most current 32 errors can be checked. Errors before that are not recorded.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the POSITION ( ) key (ADV.).
ADVANCE screen (1/2) is displayed.
2
Home sensor
6
X motor signal
10
[2] key
14
POSITION [ ] key
18
[COND/TEST] key
22
[COPY] key
13-21
3
Push roller sensor
7
Y motor signal
11
[3] key
15
POSITION [ ] key
19
[ORIGIN] key
23
[PAUSE/MENU] key
Supplement
Perform the settings in Normal mode.
4
-X media sensor
8
Tool height signal
12
[4] key
16
POSITION [ ] key
20
[FAST] key