Sorting the Cutting Data
Sorting the cutting area parameter data will increase cut efficiency by minimizing time spent by media movement
and by grouping cutting to happen all at once.
Sorting data simply sorts the area parameter data so that media movement can be minimized. It is much more
efficient than cutting at intervals with data that forces tools to jump from point to point.
Sorting will start the process after all the data are stored in the buffer memory, so it takes time to start the cutting.
Sorting might not be effective for the data that is created efficiently.
Process may be faster to turn off the sorting on the plotter, if the data is already sorted using the software on the PC.
Press the [PAUSE/MENU] key.
MENU screen is displayed.
Press the  key (TOOL).
TOOLS SETTING screen (1/3) is displayed.
Press the POSITION ( ) key.
TOOLS SETTING screen (2/3) is displayed.
Press the  key (DATA SORTING).
DATA SORTING setting screen is displayed.
Perform the settings in Normal mode.