About the Default Screen
The Initial Setup Screen appears only when powering up the machine for the first time after purchase. Here, you
can set the display language and length unit.
You can also enter the menu select from the READY status after a setup.
Display Language Settings (LANGUAGE SELECTION)
Display Length Unit Settings (LENGTH UNIT)
See "2.6 Connecting to the Power"
Once the machine is powered on (with the " | " switch) a
message will be displayed after the version is displayed.
Here, PLEASE DISPLAY LANGUAGE setting screen is displayed.
Use the POSITION (
(This manual assumes you chose the English language
Press the [ENTER] key.
After the DISPLAY LANGUAGE is selected, the LENGTH UNIT screen
Press the  key (METRIC) or the  key (INCH) to select the
length unit setting.
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to default screen.
for turning on the power.
) keys to select the language.