GRAPHTEC CE6000 SERIES User Manual page 132

4
Press the [1] key (X).
X AXIS setting screen is displayed.
5
Press the POSITION (
setting value.
6
Confirm the setting and press the POSITION ( ) key
(PREVIOUS).
MARK DISTANCE is selected and it will return to MARK DISTANCE
screen.
7
Press the [2] key (Y).
Y AXIS setting screen is displayed.
8
Press the POSITION (
setting value.
9
Confirm the setting and press the POSITION ( ) key
(PREVIOUS).
Confirm the setting and press the [ENTER] key (SET).
10
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS SETTING screen (1/4).
11
Press the [PAUSE/MENU] key.
It will return to default screen.
) key and increase or decrease the
) key and increase or decrease the
5-15
Supplement
Digits of settings can be changed by pressing
the [FAST] key.
Setting range is from 0.0 to 50000.0 mm.
Supplement
Digits of settings can be changed by pressing
the [FAST] key.
Setting range is from 0.0 mm to 50000.0 mm.
Supplement
It will return to ARMS setting screen (1/4)
without changing the settings when you press
the POSITION ( ) key (CANCEL).