Connecting to the Computer
Connect the plotter to the computer using the interface cable. Use either the USB port, the RS-232C port to
connect the plotter to the computer. Select the port depending on the specification of the software to be used and
the availability of the interface port on the computer.
Please install driver software before connecting.
Depending on the port used, use either the USB cable, the RS-232C cable (CB0023C-HS: sold separately) to
connect. Use the cables specified by Graphtec, matching the computer that is to be connected.
This will be explained in CE6000-120.
Check that the power switch is turned off (the " " side is
Connect the plotter to the computer using the interface cable.
Connection via USB interface
Connection via RS-232C interface
See the "Setting Interface"
setting the interface.