Download Print this page

GRAPHTEC CE6000 SERIES User Manual Page 201

Graphtec ce6000 series cutting plotter.
Hide thumbs


Setting the Display Length Unit (LENGTH UNIT)
The coordinate values that appear on the display and the other parameters for various settings can be changed
to either meter or inch display.
Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
Menu screen
(Normal mode)
Press the POSITION ( ) key (ADV.) in Normal mode, or
press the [3] key (ADV.) in Simple mode.
ADVANCE setting screen is displayed.
ADVANCE setting screen
(Normal mode)
Press the [3] key (LENGTH UNIT) in Normal mode, or press
the [2] key (LENGTH UNIT) in Simple mode. LANGUAGE
screen is displayed.
LENGTH UNIT setting screen is displayed.
Press the [1] key (METRIC) or the [2] key (INCH).
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ADVANCE setting screen.
Press the [PAUSE/MENU] key.
It will return to the default screen.
Menu screen
(Simple mode)
ADVANCE setting screen
(Simple mode)



   Also See for GRAPHTEC CE6000 SERIES

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jishad Jan 10, 2018 08:16:
    my graphtec ce 6000-60 showing an error message
    Hardware illegal code. Can you solve this
  • sina oyekunle Dec 21, 2017 02:44:
    my graphtec ce 6000-60 showing an error message: check cam_b-pcb
  • jitendra solanki Jun 14, 2017 05:31:
    i want ce6000 series user manual pdf file