Setting of Step Movement Distance
The parameters when setting the cutting direction are determined by the distance of the cutting direction.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the POSITION ( ) key (ADV).
ADV. setting screen (1/2) is displayed.
3
Press the [1] key (MOVE STEP).
MOVE STEP screen is displayed.
4
Press the [1] key (1.0mm) or the [2] key (0.1mm).
5
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to DEFAULT setting screen (1/2).
6
Press the [PAUSE/MENU] key.
It will return to default screen.
Supplement
Perform the settings in Normal mode.
Supplement
Value chosen here will be the movement
distance for the step movement.
Supplement
It will return to DEFAULT setting screen (1/2)
without changing the settings when you press
the POSITION ( ) key (CANCEL).
3-4