GRAPHTEC CE6000 SERIES User Manual page 42

When Feeding Long-axis Media (at exceeds 2 meters)
Position the push rollers at least 15 mm inside the edges of
the media.
15 mm
When Feeding Long-axis Media (at least 2 meters)
Position the push rollers at least 5 mm inside the edges of
the media.
5 mm
6
Pull the media taut to make sure that there is no slack in the
conveyance path, and then raise the media set lever to lower
the push rollers.
7
Release the media stopper lock (Pull the sides and slide it
forward.)
Push roller
15 mm
Media
Push roller
5 mm
Media
Media set lever
Release the
media lock
Media lock
2-12