Download Print this page

GRAPHTEC CE6000 SERIES User Manual Page 197

Graphtec ce6000 series cutting plotter.
Hide thumbs

Advertisement

5
Press the [1] key (BAUD RATE).
BAUD RATE setting screen is displ ayed.
6
Press the POSITION (
setting value.
7
Confirm the setting and press the POSITION ( ) key
(CANCEL).
BAUD RATE will be set, and it will return to RS-232C setting screen.
8
Press the [2] key (DATA BIT).
DATA BIT setting screen is displayed.
9
Press the [1] key (8 BIT) or the [2] key (7 BIT).
DATA BIT will be set, and it will return to RS-232C setting screen.
10
Press the [3] key (PARITY).
PARITY setting screen is displayed.
11
Press the [1] key (NONE), [2] key (EVEN), or the [3] key (ODD).
PARITY will be set, and it will return to RS-232C setting screen.
) key and increase or decrease the
9-5
Supplement
Baud rate can be set to 19200, 9600, 4800,
2400, 1200, 600, and 300.
Supplement
Match the setting value of the application to be
used.
Supplement
Match the setting value of the application to
be used.
It will return to RS-232C setting screen
without changing the settings when you
press POSITION ( ) key (CANCEL).
Supplement
Match the setting value of the application to
be used.
It will return to RS-232C setting screen
without changing the settings when you
press POSITION ( ) key (CANCEL).

Advertisement

   Also See for GRAPHTEC CE6000 SERIES

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jishad Jan 10, 2018 08:16:
    my graphtec ce 6000-60 showing an error message
    Hardware illegal code. Can you solve this
  • sina oyekunle Dec 21, 2017 02:44:
    my graphtec ce 6000-60 showing an error message: check cam_b-pcb
  • jitendra solanki Jun 14, 2017 05:31:
    i want ce6000 series user manual pdf file