CE7000-130AP SETUP MANUAL
This manual provides the setup procedure.
For details on each function, refer to the instruction manual
(PDF) in the supplied CD.
Checking the Accessories
Please check that all the accessories are complete.
If you find any accessories missing, please contact the
distributor where you purchased or our customer center
immediately.
Accessories
Power cable
CD
(Various software/User's Manual (pdf))
Cutter plunger (PHP33-CB09N-HS) 1 pc. Cutter blades (CB09UB (1P))
Oil-based ballpoint pen plunger
(PHP34-BALL)
Cutter blade adjustment magnifier
(PM-CT-001)
* In addition, various information may be attached.
* Accessories may vary depending on the sales area.
* For details, please contact the distributor where you
purchased.
Dedicated accessories
A stand (with a basket) is supplied.
1 pc. USB cable
SETUP MANUAL, TO ENSURE SAFE
AND CORRECT USE,
1 pc.
Cutter Blade Manual
Oil-based ballpoint pen
1 set
(KB700-BK-1P)
1 pc.
Installing driver/software
The latest driver / software version and installation
instructions are available at:
http://www.graphteccorp.com/support/index.html
Please download it if necessary.
•
Windows driver (Do not connect the computer to the cutting
plotter before installing.)
Connecting to the Power
Make sure that the power switch is off (
connection between the power connector of the cutting
1 pc.
plotter and the AC outlet of specified voltage using the
supplied power cable.
1 of each
1 pc.
Initial setup screen
The initial setup screen is displayed only when the power is
first turned on. Then select "DISPLAY LANGUAGE" and
1 pc.
"LENGTH UNIT". When the power switch is turned on
(I side), a message is displayed after displaying the version.
Select a language (English) and press the [ENTER] key.
Select the length unit and press the [ENTER] key.
It will return to default screen.
side), and make a