Setting Feed Speed for Pre Feed
Sets the speed of media transfer during the feed (media carry) of auto media transfer of received cut data,
leveling of the initial feed etc.
Set the feed speed to "SLOW" if the media shifts during the pre feed if the media is heavy or slippery. It is
normally set to "NORMAL".
"Pre Feed of Media (Paper or Marking Film)"
"Perform Automatic Pre Feed When Media is Set (Initial Feed)"
"Perform Automatic Pre Feed When Cut Data is Received"
This setting will be saved even if the power is shut off.
Press the [PAUSE/MENU] key.
MENU screen is displayed.
Press the  key (MEDIA).
MEDIA SETTING screen (1/2) is displayed.
Press the POSITION ( ) key.
MEDIA SETTING screen (2/2) is displayed.
Press the  key (FEED SPEED).
FEED SPEED setting screen is displayed.
Perform the settings in Normal mode.