Download Print this page

GRAPHTEC CE6000 SERIES User Manual Page 60

Graphtec ce6000 series cutting plotter.
Hide thumbs


After the media is detected, the plotter is ready to receive
data for cutting or plotting. This status is called "READY
status" of the default screen.
When setting is finished, the tool carriage's location will
become the initial point.
If the interface or command settings have not been made,
make these settings before sending the data.
If the settings have been made, tool adjustment is performed.
When the pen adjustments have been made, the plotter is
ready to start cutting.
Send the cutting or plotting data from the application
Dfault screen is displayed.
Menu screen
(Normal mode)
Menu screen
(Simple mode)
The screen below shows a machine currently
detecting media.



   Also See for GRAPHTEC CE6000 SERIES

Comments to this Manuals

Symbols: 0
Latest comments:
  • Ravi Nov 24, 2018 08:11:
    My graphtec ce6000-60 showing error message e01009 hardware illagele code... Plz solve my problem
  • Jishad Jan 10, 2018 08:16:
    my graphtec ce 6000-60 showing an error message
    Hardware illegal code. Can you solve this
  • sina oyekunle Dec 21, 2017 02:44:
    my graphtec ce 6000-60 showing an error message: check cam_b-pcb
  • jitendra solanki Jun 14, 2017 05:31:
    i want ce6000 series user manual pdf file