Download Print this page

GRAPHTEC CE6000 SERIES User Manual Page 76

Graphtec ce6000 series cutting plotter.
Hide thumbs

Advertisement

To make 3 cuts with set value and ±1 of set value
Operation
1
Load the media for test cutting in the plotter.
2
Press the [COND/TEST] key in the default screen.
In Normal mode, CONDITION screen (1/3) is displayed.
In Simple mode, CONDITION screen (1/5) is displayed.
CONDITION screen
(Normal mode)
3
Press the POSITION ( ) key (CUT TEST).
CUT TEST screen is displayed.
CONDITION screen
(Normal mode)
4
Press the POSITION (
location you wish to perform the test cutting.
5
Press the [1] key (FORCE).
3 cutting test patterns are cut, with current FORCE in the center, and 1
each of FORCE increased and decreased for 1.
6
Press the [ENTER] key after completion.
It will return to CUT TEST menu screen.
7
Press the [2] key (CUTTER OFFSET). (Normal mode only)
3 cutting test patterns are cut, with current CUTTER OFFSET in the
center, and 1 each of CUTTER OFFSET increased and decreased for 1.
8
Press the [ENTER] key after completion.
It will return to CUT TEST menu screen.
9
Press the [4] key (CANCEL).
It will return to CONDITION screen.
10
Press the [COND/TEST] key.
It will return to default screen.
CONDITION screen
(Simple mode)
CONDITION screen
(Simple mode)
) key the tool carriage to the
2-46
Supplement
It will return to CONDITION screen by
pressing the [4] key (CANCEL) .
Change cutter offset settings in Normal
mode.
Supplement
Pushing the [POSITION] and [FAST] keys
simultaneously will move the tool carriage faster.
CAUTION
When the [1] key (FORCE) is pressed, the tool
carriage will start moving, so take care not to
cut your fingers.
Supplement
Test cut patterns can have their cut order and
force changed as shown below.
+1
0
CAUTION
When the [2] key (CUTTER OFFSET) is
pressed, the tool carriage will start moving, so
take care not to cut your fingers.
Cut Order
-1

Advertisement

   Also See for GRAPHTEC CE6000 SERIES

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jishad Jan 10, 2018 08:16:
    my graphtec ce 6000-60 showing an error message
    Hardware illegal code. Can you solve this
  • sina oyekunle Dec 21, 2017 02:44:
    my graphtec ce 6000-60 showing an error message: check cam_b-pcb
  • jitendra solanki Jun 14, 2017 05:31:
    i want ce6000 series user manual pdf file