GRAPHTEC CE6000 SERIES User Manual page 233

6
Press the [1] key (DONE 1/2) or the [2] key (DONE 2/2).
Message to confirm tool position is displayed.
7
Move the tool carriage to print start position by pressing the
POSITION (
8
Confirm that movable parts of the tool and media can safely
operate and press the [ENTER] key.
Selected page of the CONDITION LIST is printed.
9
It will return to READY status when the printing is completed.
10
Press the [PAUSE/MENU] key.
It will return to READY status when the printing is completed.
) key.
Supplement
Press the [3] key CANCEL CONDITION)
to return to the TEST menu screen without
printing the list.
Do not place you hand around the moving
areas. The tool carriage will start moving, so
there is a chance of injury.
Supplement
Set the media and repeat steps 6 to 8 to print
different page at this point.
13-15
CAUTION