Download Print this page

GRAPHTEC CE6000 SERIES User Manual: Manually Adjusting The Sensor Level (threshold Value)

Graphtec ce6000 series cutting plotter.
Hide thumbs

Advertisement

Manually Adjusting the Sensor Level (Threshold Value)

Scan level (threshold value between the media background color and registration mark) of the sensor scanning
the registration mark is set.
Sensor is adjusted to scan the registration mark written in black lines on white background. Adjust the scan level
of the sensor depending on the color and gloss of the media.
Adjusting the Sensor Level
P.5-20
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the [2] key (ARMS).
ARMS SETTING screen (1/4) is displayed.
3
Press the POSITION ( ) key.
ARMS SETTING screen (4/4) is displayed.
4
Press the [2] key (SENSING LEVEL).
SENSING LEVEL screen is displayed.
Supplement
It will return to ARMS setting screen (4/4)
without changing the settings when you
press the POSITION ( ) key (CANCEL).
Detection level will define the threshold to
be placed at what percentage point of the
signal level difference between the media
background color and the registration mark.
The setting range is 30 to 90%.
X sets the level to detect the registration
mark when moving in the X direction, and Y
sets the level to detect the registration mark
when moving in the Y direction.
5-22

Advertisement

Troubleshooting

   Also See for GRAPHTEC CE6000 SERIES

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jishad Jan 10, 2018 08:16:
    my graphtec ce 6000-60 showing an error message
    Hardware illegal code. Can you solve this
  • sina oyekunle Dec 21, 2017 02:44:
    my graphtec ce 6000-60 showing an error message: check cam_b-pcb
  • jitendra solanki Jun 14, 2017 05:31:
    i want ce6000 series user manual pdf file