Download Print this page

GRAPHTEC CE6000 SERIES User Manual Page 4

Graphtec ce6000 series cutting plotter.
Hide thumbs

Advertisement

Do not use the power cord if it is damaged.
Use of a damaged cord may result in electric shock or a fire
hazard due to current leakage.
Replace the power cord with a new one.
Unplug the power
cord from the socket
Do not use or store the plotter in a location exposed
to direct sunlight or the direct draft of an air
conditioner or heater.
Such locations may impair the
performance of the plotter.
Prohibited
Do not place any receptacle containing water or
other fluid on top of the plotter.
Fluid falling inside the plotter may cause electric shock or a
fire hazard due to current leakage.
Avoid water
Beware of
electrical shock
When disconnecting the power cord or interface
cable, do not pull on the cord/cable.
Such action will damage the cord/cable, resulting in a fire
hazard or electric shock.
Prohibited
Safety Precautions
WARNING
Be careful when handling the cutter blade.
Touching the blade with your bare hand may cause injury.
Do not touch the cutter blade while cutting is in progress.
No touching
CAUTION
Do not use the plotter in an excessively dusty or
humid location.
Such locations may impair the performance of the plotter.
Do not use the plotter in a location subject to
excessive mechanical vibration or electrical noise.
Such locations may impair the performance of the plotter.
If water or foreign matter enters the plotter,
discontinue use. Turn off the power and unplug the
power cord from the electrical socket.
Use of a damaged cord may result in electric shock or a fire
hazard due to current leakage.
Contact your sales representative or nearest Graphtec vendor
for repairs.
Unplug the power
cord from the socket

Prohibited
Prohibited

Advertisement

   Also See for GRAPHTEC CE6000 SERIES

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jishad Jan 10, 2018 08:16:
    my graphtec ce 6000-60 showing an error message
    Hardware illegal code. Can you solve this
  • sina oyekunle Dec 21, 2017 02:44:
    my graphtec ce 6000-60 showing an error message: check cam_b-pcb
  • jitendra solanki Jun 14, 2017 05:31:
    i want ce6000 series user manual pdf file