Setting Length of the Overcut
Set the length of overcut with tangential emulation.
Operation
1
Press the [COND/TEST] key.
CONDITION setting screen (1/3) is displayed.
2
Press the POSITION ( ) key.
CONDITION setting screen (2/3) is displayed.
3
Press the [3] key (OVERCUT).
OVERCUT setting screen is displayed.
4
Press the [1] key (Condition No.)
CONDITION No. selection screen is displayed.
5
Press the POSITION (
No.
6
Confirm the setting, and press the POSITION ( ) key
(PREVIOUS).
Condition No. is selected and return to OVERCUT setting screen.
) key and select the CONDITION
7-4
Supplement
Perform the settings in Normal mode.