Download Print this page

GRAPHTEC CE6000 SERIES User Manual: When Coordinate Axes Rotation Are Set; When Coordinate Axes Are Rotated After Origin Point Is Set

Graphtec ce6000 series cutting plotter.
Hide thumbs


When Coordinate Axes Rotation are Set

If the origin point is moved while the coordinate axes are rotated, the origin point will move as shown below.
See "Setting the Cutting Direction"
Original origin point

When Coordinate Axes are Rotated After Origin Point is Set

The origin point will be initialized as shown below if the coordinate is rotated after moving the origin point.
Distance "a" will be maintained, but distance "b" will be initialized.
New origin point
Original origin point
Before setting
To use the origin point movement and coordinate axes rotation together, always rotate the coordinate axes first, and then move
the origin point.
Coordinate value displayed after setting new origin point is a distance from the new origin point.
about the rotation of the coordinate axes.
New origin
New origin point
Original origin point
After setting



   Also See for GRAPHTEC CE6000 SERIES

Comments to this Manuals

Symbols: 0
Latest comments:
  • Ravi Nov 24, 2018 08:11:
    My graphtec ce6000-60 showing error message e01009 hardware illagele code... Plz solve my problem
  • Jishad Jan 10, 2018 08:16:
    my graphtec ce 6000-60 showing an error message
    Hardware illegal code. Can you solve this
  • sina oyekunle Dec 21, 2017 02:44:
    my graphtec ce 6000-60 showing an error message: check cam_b-pcb
  • jitendra solanki Jun 14, 2017 05:31:
    i want ce6000 series user manual pdf file