Adjust With 4Points - GRAPHTEC CE6000 SERIES User Manual

4
Press the [PAUSE/MENU] key.
MENU screen is displayed.
5
Press the [2] key (ARMS).
ARMS SETTING screen (1/4) is displayed.
Steps are different from here depending if it is going to move
to registration mark automatically to scan the registration
mark, or if it is going to move manually to scan. See next
section.
Adjust Automatically
P.5-40
Adjust Manually
P.5-41

Adjust with 4POINTS

4POINTS adjustment will scan 4 registration marks in the corners, where the adjustment is done measuring the
tilting of the X and Y axes and the distance between each of the registration marks. It will perform 2 axes warp
adjustment in addition to the 2 axes (tilt) adjustment and distance adjustment, so it can adjust more precisely
than other methods.
Data
Print
Image is printed tilted
and warped
GRAPHTEC 2POINT adjusted cut
General 1POINT adjusted cut
Cut
5-38