Media That Registration Mark Cannot be Detected
It may be hard to scan the registration mark as following, depending on the media conditions.
Transparent media
Registration mark cannot be scanned because the cutting mat surface is also read in.
Registration mark other than black line on white background
Sensitivity of the sensor is based on the registration mark written in black on white background. It makes
harder to scan the registration mark on colored background or written in colors other than black. Adjust the
sensitivity level of the sensor. (See "Adjusting the Sensor Level "
Sloppy plotting and media
Registration mark may not be scanned if the surface is dirty, bent, or the lines are blurred.
Thick media
The registration mark can be scanned only on the media with thickness of 0.3 mm or less.
Laminated media
Supplement
Use the axes adjustment function if the automatic registration mark scan is not possible. (See "Manual Position Adjust"
P.5-20
5-6
)
)
P.6-3